Video - July 13, 2017
I have been enamored with the simplicity and never-ending usefulness of the cross-cut sled ever since I saw David Marks use one on Woodworks. I’ve built numerous sleds over the years but the one I made in this video has been with me since 2011! One of the primary benefits of a cross-cut sled is the fact that the base provides zero-clearance, supporting the work through the entire cut and producing near tearout-free results. Over time, regular use can cause that slot to widen. Accidentally using the sled while the blade is at an angle can also widen the slot. And as in my case, a new saw can certainly create issues where zero-clearance is concerned. So we have to have a reasonable way to repair the slot without rebuilding the entire sled. Here’s how you can fix it.
Using masking tape (I prefer the blue variety), mask off the underside of the slot making sure to wrap the tap up the fence boards of the sled. We want to make sure there’s absolutely no opportunity for leakage in the next step.
Using West System Epoxy (105 Resin, 205 Hardener, 404 Filler), fill the slot so that the epoxy sits just proud of the sled surface. Be sure to keep an eye on the slot and add more epoxy as needed. Clamp a caul across the surface of the sled while the glue dries to help keep the two halves of the sled flush.
After the epoxy dries, use a card scraper or block plane to remove the excess and then switch to a sander for the final smoothing. If you’re good with a sander you can use it for the entire process, just be careful not to create any divots in the sled. The area near the fence will likely build up to some extent and you’ll need to use a chisel and a scraper to remove it.
Remove the blue tape from the underside of the sled and place it back on the saw. Turn the saw on with the blade fully retracted and then slowly raise it up. The blade will cut through the epoxy creating a new zero-clearance slot. Boom! Your sled is repaired!
The Wood Whisperer is proudly sponsored by brands that Marc trusts. Thank you for making this possible.
Copyright © 2006-2020 The Wood Whisperer Inc. The Wood Whisperer, The Wood Whisperer Guild, TWW, and TWW Guild are trademarks of The Wood Whisperer Inc. All rights reserved. Designed and developed by Underscorefunk Design
This site uses affiliate links. Given this, please assume that any links leading you to products or services are affiliate links that we will receive compensation from. However, there are millions of products and services on the web, and I only promote those products or services that I would use personally. The Wood Whisperer abides by word of mouth marketing standards and holds integrity in the highest regard. Should I ever be compensated to write, I will make full disclosure. I always give honest opinions, findings, and experiences on products. The views and opinions expressed on this blog are purely our own. Any product claim, statistic, quote or other representation about a product or service should be verified with the manufacturer, provider or party in question. All content on The Wood Whisperer is copyrighted, and may not be reprinted in full form without my written consent.