The rocking horse is a great project for new and experienced woodworkers alike so its perfect for our charity build. The construction is fairly straightforward and requires minimal tools & materials. If you would like to build along, you can download full-size patterns here. Unfortunately, the full official set of plans are no longer free but you can purchase them here. Between the video and the full-size pattern, you can probably estimate the sizes of the smaller parts, making it unnecessary to purchase the plans.
There is a lot of detail in this video! I wanted to make it as approachable as possible for all skill levels so I spend a good deal of time going over proper layout. The “real-time” perspective gives you a much more realistic idea of how a project like this goes together.
– A pre-laminated pine board approximately 3/4″T x 20″W x 72″L.
– Short length of 3/4″ dowel rod
– 3/4″ forstner bit
– Counter-sink bit
– Jigsaw with a fine tooth blade (18-20 TPI)
– Router outfitted with a 1/8″ round-over bit
– Hand Saw
– French curve
– Construction Adhesive
– Spray Adhesive
For each person who completes a rocking horse (one per person), I am donating $1 to Livestrong. We also have numerous corporate and individual sponsors who are matching my donation. With their help and yours, we are trying to reach our goal of $10,000! If you don’t want to build along you can always donate directly. And if you’re interested in becoming a sponsor, please feel free to contact me. 100% of proceeds benefit Livestrong.
When you finish your rocking horse, simply send me a picture and your build will count toward our final tally. All pictures must be submitted by November 14th.