268 – Scrapwood Jewelry Boxes

Video - September 8, 2016

Scrapwood. It’s something woodworkers accumulate as a natural part of the woodworking process. Even though the pieces are hard to incorporate into larger projects, there’s still a LOT of value in them and it’s a good idea to come up with small projects that can make good use of the stuff. That’s exactly what I had in mind when I created these small elegant jewelry boxes. And while the project appears simple, you’ll see that it does require attention to detail and precision. Even small projects deserve your best effort! So let’s dig in!

Looking for a source for 5mm Barrel Hinges? Try these!

The giveaway is now closed. But you can go to QALO’s website and pick up your very own Ava series ring.

The Plans

Gallery

Viewer Gallery

Discussion

pug September 8, 2016 1:37 pm

great video marc, always enjoy your entertaining and informaive videos.

Reply
Harley Riddle September 8, 2016 5:21 pm

Have you guys given away all of those beautiful rings??

Reply
Jim Eller September 8, 2016 6:00 pm

Marc,

Those are some great looking boxes. Thanks for the plans and the Christmas gift idea.

Gotta head for the shop before I forget what I saw and head.

JimE

Reply
eliric5 September 9, 2016 7:07 pm

Great boxes. Thanks for the new videos and ideas. Always look forward to what you post as a novice woodworker. Learning tremendously. Eliric5@me.com.

Reply
Cliff DeWitt September 12, 2016 11:43 am

Marc,
Okay, where did you get the 5mm hinges?

the smallest I was able to find were 10mm.

Reply
- Marc Spagnuolo September 12, 2016 1:21 pm
  
  Try that fancy little link up there in the writeup. :)
  
  Reply
- dbonde September 19, 2016 5:26 pm
  
  Lee Valley – search for Brass Pin Hinges
  
  Reply
TheKnittingWoodworker September 13, 2016 9:30 pm

Good information. I like your shows. If the rings are available- do you send those to Europe?

Reply
Collin September 14, 2016 11:30 am

Great video. I wish I had scraps like that. This seems like a great project no matter your level of experience.

Reply
Peter Valcanas September 15, 2016 2:02 pm

Can you tell me what type of epoxy you used to mount the hinges.
I built 2 of these in the last few days and they area a great little project and fun to make.
Thanks Marc
Pete

Reply
- Peter Valcanas September 16, 2016 3:28 pm
  
  Can anybody suggest an epoxy. I have never used any with wood and would appreciate any info.
  
  Thanks
  
  Reply
Jose September 16, 2016 9:08 am

Desde España, admirable tu ingenio y utensilios. Aquí muchas de esas herramientas, no existen. jubilado de 75 años ,no carpintero , te envía una brazo.

Reply
Scott September 21, 2016 7:37 am

FYI,
Appears the links to the PDF’s and Sketchup plans are broken.

Reply
- Marc Spagnuolo September 22, 2016 3:21 pm
  
  Just tested them. Seem to be working ok.
  
  Reply
Pete white October 12, 2016 8:59 pm

Just drilled for the barrel hinges .28 to 30 as instructed. But still too big of a gap. Is one side, either top or bottom supposed to be deeper??

Reply
- Marc Spagnuolo October 13, 2016 7:04 am
  
  Not to my knowledge. Just make the holes incrementally deeper until the pieces come together.
  
  Reply
Andy Blackman November 1, 2016 10:56 am

This was a fun project. Took forever to get the barrel hinges. Next time flock instead of adhesive felt.

Thanks,

Reply
- Marc Spagnuolo November 1, 2016 11:02 am
  
  Very nice. I’ll add it to the gallery!
  
  Reply
Kevin Bond November 25, 2016 3:33 pm

Hi Mark.
Thanks for all the help you give to us amateurs !
I really like the scrap wood jewelry boxes you made.
Can you tell me what is the light colored wood you use on the ends of the Walnut box ?
Thanks Kev

Reply
- Marc Spagnuolo November 25, 2016 7:53 pm
  
  Thanks Kev. That’s figured maple.
  
  Reply
  - Kevin Bond November 26, 2016 6:31 am
    
    Not so easy to find over here in the UK !
    Is there a trick to stop this from yellowing over time?
    
    Reply
Steve December 30, 2016 8:07 pm

Marc, looks like a fun little project. Thanks for sharing. One quick question, I’ve never really worked with epoxy, is there a particular brand that you like?
Thanks, steve

Reply
- Marc Spagnuolo December 31, 2016 8:51 am
  
  West Systems: http://amzn.to/2ioJxnN That’s a link to the resin but you’ll also want to pick up the hardener and the pumps.
  
  Reply
Paul Archer January 27, 2017 2:54 pm

Hi Marc

Fantastic project. I made a pair over Christmas. How do I send you photos for your gallery please?

Paul

Reply
- Marc Spagnuolo January 27, 2017 3:59 pm
  
  You can use the form here: http://www.thewoodwhisperer.com/contact/ Just select woodworking question.
  
  Reply
  - Paul Archer February 16, 2017 4:29 pm
    
    Thanks, Marc
    Submitted a link there to a shared google album.. Hopefully that worked.
    
    New workshop looking great by the way!
    
    Paul
    
    Reply
Mike Esposito February 15, 2017 8:50 am

I happen to look up David Knipfer, on his site he shows making like 10 of these at a time but he hogs out the material from the bottom with a band Saw. he cuts a 1/4″ kerf into the block then goes to the BS slides the blade into the kerf and cuts away. Seems like a harder way to do it then using a dado stack. Thanks for the video

Mike

Reply
- Barry G. Sumpter March 26, 2019 7:56 pm
  
  Harder. And strange.
  
  Reply
Arthur September 1, 2017 1:04 pm

Hello Marce.
Nice project!
Appears the links to the PDF’s and Sketchup plans are broken.

Reply
- Marc Spagnuolo September 1, 2017 2:39 pm
  
  Fixed.
  
  Reply
Arthur September 3, 2017 4:49 am

Hello Marc!
Thank You.
Arthur

Reply
Ethan Wu January 11, 2018 8:39 pm

Sketch up seems to be broken :(

Reply
- Marc Spagnuolo January 11, 2018 9:57 pm
  
  Which one are you downloading and what’s the trouble? They seem to be working on my end.
  
  Reply
Trent March 4, 2018 11:14 am

Hi Marc,
Just noticed a discrepancy between the video and plans. Video says 1/4 inch for the curved top. Plans show 1/8 inch.
Thanks for the vid and plans
Trent

Reply
Larry October 29, 2018 5:22 pm

Thanks for your website.

Reply
Michael Lusk November 3, 2018 11:49 am

Did I miss something? How did you make the curve for the top?

Reply
- Marc Spagnuolo November 4, 2018 8:23 am
  
  I think you missed pretty much the whole middle of the video. :) Starting at 7:40.
  
  Reply
Ron Horn November 26, 2019 8:38 am

Hi Marc – Can you tell me what woods were used on the fourth box? The one with the added center piece on each end.

Love your videos man!

Thank you

Reply
- Marc Spagnuolo November 27, 2019 9:09 am
  
  Purpleheart and maple
  
  Reply
  - Ron December 2, 2019 8:46 am
    
    Oh wow I wouldn’t have guessed that. I made a tray for my wallet, keys etc. out of purpleheart. The project ended up being more on the red/purple side.
    
    I’m a noob so I’m still learning. It’s amazing how wood takes on so many variations.
    
    Thanks!
    
    Reply
  - Ron Horn December 6, 2019 10:47 am
    
    Thanks!
    
    Reply

268 – Scrapwood Jewelry Boxes

The Plans

Gallery

Viewer Gallery

Sponsors

Advertisers